The Technique on Sandblasted

  1. Transfer the pattern to the rubber resist by burnishing it with a squeegee.

  2. After cutting the pattern, remove all stage 1 elements. With a complex pattern, there can be many elements with the same number.

  3. When all stage elements are blasted to depth, remove the stage 2 elements and blast.

  4. Continue the process through the rest of the stages.

  5. Check your progress frequently from the smooth side of the glass.

  6. The finished pieces. Note the disappearing lines and undercut elements.

 

 
 
 
 
 
 
 
         
 
We accept all major credit cards and local banks transfer.
© 2003 - 2011 . Ibox Design Sdn. Bhd.